Versa Plank: Where Innovation Meets Technical Precision
Innovative WPC Planks: Versa Plank’s Technical Insights
Raw Material Composition and General Physical Characteristics
| 1.GENERAL RAW MATERIAL COMPOSITION |
| Wood Powder |
55% |
High Density Polyethylene(HDPE) |
30% |
| Filling |
9.5% |
PE Additives |
4% |
| Antimicrobial Agents |
0.2% |
Antioxidant |
0.5% |
| Master Batch |
0.8% |
| 2. GENERAL PHYSICAL CHARACTERISTICS |
| Density g / cu.cm |
1.400 |
Tensile strength |
29 Mpa |
| Modules of elasticity – Mpa |
3500 Mpa |
Modules of rupture – Mpa |
40 Mpa |
| Flexural strength – Mpa |
45 Mpa |
Coefficient of friction |
0.29 |
| Coefficient of friction |
0.4 |
thermal expansion |
6×10-5 1/k |
| Water absorption |
0.21% |
Termite resistance |
Anti-termite |
| Fungal resistance |
0 Grade |
Is the product green certified? |
applied for |
| 3. SIZE TOLERANCE AS PER EN 13489 |
| Thickness |
±0.5MM |
Length of the surface |
+ 2-3MM |
| Width of the surface |
±0.5MM |
Deviation from squareness |
±0.5MM |
| Versa requires very little care. However, as an outdoor material, certain cleaning is required to keep your application looking good over time. Please read this guide to help maintain your's well. |
| PROBLEM |
CARE & FIXES |
| Dust and Dirt |
Dust and dirt especially on decks needs to be cleaned by hosting with fresh water periodically. Stubborn debris can be pressure hosed and nylon brushed along the length of the profile. Mild soap solution with warm water can be used for persistent dirt. |
| Plant and Leaf Stains |
Brush away and hose off all loose plant matter, First use warm water with a mild detergent with brushing to remove stains.
If persistent use a stronger detergent with low concentration oxalic acid with brushing. |
Garden Manure and
Red Soil |
Brush away and hose off all loose matter. First use warm water with a mild detergent with brushing to remove stains. If persistent use a stronger detergent with low concentration oxalic acid with brushing |
| Salt Deposits |
Brush away and hose off all loose salt particles. Use warm water with a mild detergent with brushing to remove stains. If
persistent allow surface to dry and sand mildly to remove all traces of salt deposits. |
| Rust and Pigment Stains |
Brush away and hose the surface. First use warm water with a mild detergent with brushing to remove stains. If persistent use a stronger detergent with low concentration oxalic / phosphoric acid with brushing. |
Cement and
Construction Debris |
Brush away and high pressure hose off all cement particles. Use warm water with a mild detergent with hard bristle brushing to remove debris. If persistent allow surface to dry and sand mildly to remove all traces of cement deposits. |
Food, Beverages and
Oil Stains |
Hose surface with water first. Use any solution with content of acetone xylene or methanol and wipe the stains in the plank or section direction. If persistent sand mildly to remove stain and use solution again if necessary. |
| Paint Stains |
Hose surface with water first. Use any solution with content of acetone xylene or methanol and wipe the stains in the plank or section direction. If persistent sand mildly to remove stain and use solution again if necessary. |
| Mold & Mildew |
Mold or mildew needs to be cleaned by hosing with fresh water periodically. Stubborn mold can be pressure hosed and
nylon brushed along the length of the profile. Mild soap solution with warm water can be used for persistent dirt. |
| Scratches and Abrasions |
Scratches and mild abrasions will disappear over time, however deep abrasions and
scuffs can be mildly sanded in the direction of the profile to be removed. |
